init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. init syspll 800MtHsmz : releasRKeE iK_dI 0D xd(b9yc9te2[007,: 7]co)m =mi t5c tai10me0 00We00d 0A00pr5 3d24 1U3LT:1 7(b:5yt5 e2[001:97] -)0 7 0 0 = 4b949fa690c9483d Chip version = 0xa0 Check bootmode = 0x0 ! Image Load done with bootmode=0x0 ! NOTICE: bl31v13692d41f6 starting...5200a7914a95 PMIC: SY8824B selected for board bg5ct_ffv ! set Vcpu from 1050000uv to 1000000uv set Vcore from 1050000uv to 1100000uv i2c status:0x00000550, send_num:0 (expect:0), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_AMP_power, i2c_master_write_and_read fail. sub_cmd_id: 4, param_len: 0x2c, 0x0, 0x4 check keys ret=1 ####register ta LOGO register_ta:tz comm rsp done! 80000000, 0 ####register ta CYPT register_ta:tz comm rsp done! 80000000, 0 [fastlogo] flash_ts_get DisplayPrimaryHDMIBitDepth=2 TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 6 invoke command 0x00000000 TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 6000100 MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1 MV_VPP_FL_Init:891: enableFlushCache=0, iHDMIEnable=0, enableAutoPush=1 [fastlogo] value of frame number=3 [fastlogo] got fit size logo: 1280x720(index:1, num:3) [fastlogo] showlogo_start: logo_start=4148224, logo_size=1843200, logo_width=1280, logo_height=720, logo_stride=2560 MV_VPPOBJ_FL_DisplayFrame:4193: enableInterrupt=0 i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave init_led_devices, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave init_led_devices, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave init_led_devices, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_LED9_color, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_LED9_color, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_LED9_color, i2c_master_write_and_read fail. load boot normal image. BOOT IMAGE HEADER VERSION: 2 ! verify slot done TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 7 invoke command 0x00000000 TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 7000200 DRM_SetVersionsV4: Bootpatchlevel: 0x30188 DRM_SetVersionsV4: Vendorpatchlevel: 0x30188 DRM_SetVersionsV4: Systempatchlevel: 0x30188 INFO: set eMMC dll_phsel0 to 0x2a for kernel. size of allocated memory is not correct! can't find the allocated memory [ 0] Start kernel at 0x05880000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.178 (jim@vas-build-58) (Android (5407736 based on r353983b) clang version 9.0.2 (https://android.googlesource.com/toolchain/clang 649b4adfc45b26ae937fe597ef6134d244f89686) (https://android.googlesource.com/toolchain/llvm 45936e9d187aaac2b7c0245f6f8c10138f6a02e9) (based on LLVM 9.0.2svn)) #1 SMP PREEMPT Thu Oct 14 01:39:35 CST 2021 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] MAX DMA PHYS limited to 2048MB [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 22 pages/cpu s52288 r8192 d29632 u90112 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 638064 [ 0.000000] Kernel command line: androidboot.boot_devices=soc/f7aa0000.sdhci console=ttyS0,115200 init=/init root=/dev/ram0 androidboot.console=ttyS0 androidboot.hardware=sequoia androidboot.wificountrycode=US firmware_class.path=/vendor/firmware loop.max_part=7 max_dma_phys=2G buildvariant=userdebug androidboot.serialno=SKBFXYW11JLB androidboot.deviceid=BFX-UA300_2020_000001341 androidboot.vbmeta.device=PARTUUID=d4981a2b-0478-544e-9607-7fd3c651068d androidboot.vbmeta.avb_version=1.1 androidboot.vbmeta.device_state=locked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=6848 androidboot.vbmeta.digest=b73d9f088603871a778fe33aac669094f75b1a818804d15862c9d689ac48efca androidboot.veritymode=disabled androidboot.dtbo_idx=0 androidboot.dtb_idx=0 androidboot.bootloader=2016.11-00210-g6a9651b-dirty macaddr=a8:93:4a:fe:7c:13 emmc_ts.dev_id=18 emmc_ts.size=4194304 emmc_ts.erasesize=524288 emmc_ts.writesize=8192 androidboot.verifiedbootstate=green androidboot.bootreason=normal_boot chipi [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes [ 0.000000] log_buf_len min size: 16384 bytes [ 0.000000] log_buf_len: 32768 bytes [ 0.000000] early log buf free: 13652(83%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB: mapped [mem 0x45bff000-0x49bff000] (64MB) [ 0.000000] Memory: 2026916K/2592768K available (9662K kernel code, 1070K rwdata, 3316K rodata, 2432K init, 482K bss, 565852K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0x (ptrval) - 0x (ptrval) ( 9664 KB) [ 0.000000] .rodata : 0x (ptrval) - 0x (ptrval) ( 3392 KB) [ 0.000000] .init : 0x (ptrval) - 0x (ptrval) ( 2432 KB) [ 0.000000] .data : 0x (ptrval) - 0x (ptrval) ( 1070 KB) [ 0.000000] .bss : 0x (ptrval) - 0x (ptrval) ( 483 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00160000 - 0xffffffbf03000000 ( 46 MB actual) [ 0.000000] memory : 0xffffffc005800000 - 0xffffffc0c0000000 ( 2984 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 25.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.000538] Console: colour dummy device 80x25 [ 0.000558] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) [ 0.000570] pid_max: default: 32768 minimum: 301 [ 0.000645] Security Framework initialized [ 0.000653] SELinux: Initializing. [ 0.000711] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.000720] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001636] sched-energy: CPU device node has no sched-energy-costs [ 0.001646] Invalid sched_group_energy for CPU0 [ 0.001652] CPU0: update cpu_capacity 1024 [ 0.029952] ASID allocator initialised with 65536 entries [ 0.200220] Detected VIPT I-cache on CPU1 [ 0.200258] Invalid sched_group_energy for CPU1 [ 0.200261] CPU1: update cpu_capacity 1024 [ 0.200265] CPU1: Booted secondary processor [410fd034] [ 0.280293] Detected VIPT I-cache on CPU2 [ 0.280320] Invalid sched_group_energy for CPU2 [ 0.280323] CPU2: update cpu_capacity 1024 [ 0.280326] CPU2: Booted secondary processor [410fd034] [ 0.360375] Detected VIPT I-cache on CPU3 [ 0.360402] Invalid sched_group_energy for CPU3 [ 0.360405] CPU3: update cpu_capacity 1024 [ 0.360408] CPU3: Booted secondary processor [410fd034] [ 0.360487] Brought up 4 CPUs [ 0.360525] SMP: Total of 4 processors activated. [ 0.360534] CPU features: detected feature: 32-bit EL0 Support [ 0.360546] CPU: All CPU(s) started at EL2 [ 0.360568] alternatives: patching kernel code [ 0.360718] Invalid sched_group_energy for Cluster3 [ 0.360726] CPU3: update max cpu_capacity 1024 [ 0.360732] Invalid sched_group_energy for Cluster2 [ 0.360738] Invalid sched_group_energy for Cluster1 [ 0.360744] Invalid sched_group_energy for Cluster0 [ 0.370311] CPU1: update max cpu_capacity 1024 [ 0.370510] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.370525] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.370672] pinctrl core: initialized pinctrl subsystem [ 0.371386] NET: Registered protocol family 16 [ 0.400377] cpuidle: using governor menu [ 0.400642] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval)) [ 0.400653] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.400844] DMA: preallocated 256 KiB pool for atomic allocations [ 0.450988] SCSI subsystem initialized [ 0.451187] usbcore: registered new interface driver usbfs [ 0.451239] usbcore: registered new interface driver hub [ 0.451298] usbcore: registered new device driver usb [ 0.452349] i2c_designware f7fcb000.i2c: could not find pctldev for node /soc/pinctrl@fe2200/tw2-pmux, deferring probe [ 0.452381] i2c_designware f7fcc000.i2c: could not find pctldev for node /soc/pinctrl@fe2200/tw3-pmux, deferring probe [ 0.452418] Linux video capture interface: v2.00 [ 0.452633] Marvell Berlin ION information [ 0.452643] heap_id[0] memory start[49c00000] len[1a000000] name[NonSecure] type[2] attri[00000f36] [ 0.452651] heap_id[1] memory start[63c00000] len[01400000] name[NonSecure-NC] type[5] attri[00000f3a] [ 0.452659] heap_id[2] memory start[65000000] len[1b000000] name[Secure] type[5] attri[00000f3d] [ 0.452667] heap_id[3] memory start[00000000] len[00000000] name[system-ion] type[0] attri[00000000] [ 0.452673] berlin found 1 secure heap [ 0.452679] berlin found secure heap[0] head_id[2] [ 0.544347] Advanced Linux Sound Architecture Driver Initialized. [ 0.544832] Bluetooth: Core ver 2.22 [ 0.544866] NET: Registered protocol family 31 [ 0.544872] Bluetooth: HCI device and connection manager initialized [ 0.544884] Bluetooth: HCI socket layer initialized [ 0.544895] Bluetooth: L2CAP socket layer initialized [ 0.544926] Bluetooth: SCO socket layer initialized [ 0.545678] clocksource: Switched to clocksource arch_sys_counter [ 0.600948] VFS: Disk quotas dquot_6.6.0 [ 0.601013] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.606174] NET: Registered protocol family 2 [ 0.645781] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.646088] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.646726] TCP: Hash tables configured (established 32768 bind 32768) [ 0.646794] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.646907] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.647136] NET: Registered protocol family 1 [ 0.647394] Trying to unpack rootfs image as initramfs... [ 0.682049] Freeing initrd memory: 752K [ 0.682594] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.684838] audit: initializing netlink subsys (disabled) [ 0.684898] audit: type=2000 audit(1234567890.670:1): initialized [ 0.685482] workingset: timestamp_bits=45 max_order=19 bucket_order=0 [ 0.692475] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.692649] Registering sdcardfs 0.1 [ 0.692897] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.693100] fuse init (API version 7.26) [ 0.698022] io scheduler noop registered [ 0.698030] io scheduler deadline registered (default) [ 0.698150] io scheduler cfq registered [ 0.704969] GPIO line 359 (phy0_reset) hogged as output/high [ 0.723023] marvell,berlin-sm f7f80000.sm: rtc core: registered bsm_rtc as rtc0 [ 0.723773] tz_logger_dev: created 128K log 'tzlogger' [ 0.723785] MV_VPP_InitMode:Normal mode, ta_flag:0 [ 0.724096] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.724823] console [ttyS0] disabled [ 0.724870] f7fcd000.uart: ttyS0 at MMIO 0xf7fcd000 (irq = 32, base_baud = 1562500) is a 16550A [ 1.655919] console [ttyS0] enabled [ 1.659965] f7fce000.uart: ttyS1 at MMIO 0xf7fce000 (irq = 33, base_baud = 1562500) is a 16550A [ 1.669204] [drm] Initialized [ 1.731217] brd: module loaded [ 1.803718] loop: module loaded [ 1.817543] zram: Added device: zram0 [ 1.821799] libphy: Fixed MDIO Bus: probed [ 1.826453] tun: Universal TUN/TAP device driver, 1.6 [ 1.831670] tun: (C) 1999-2004 Max Krasnyansky [ 1.839764] Network controller revision: 0010 [ 1.845436] mvneta f7b60000.ethernet eth0: Using random mac address de:de:cf:4b:82:07 [ 1.853757] libphy: orion_mdio_bus: probed [ 1.858589] fxc **** rtl8211f_probe enter [ 1.862790] PPP generic driver version 2.4.2 [ 1.867304] PPP BSD Compression module registered [ 1.872162] PPP Deflate Compression module registered [ 1.877408] PPP MPPE Compression module registered [ 1.882357] NET: Registered protocol family 24 [ 1.886956] PPTP driver version 0.8.5 [ 1.891048] usbcore: registered new interface driver r8152 [ 1.896773] usbcore: registered new interface driver asix [ 1.902395] usbcore: registered new interface driver ax88179_178a [ 1.908734] usbcore: registered new interface driver cdc_ether [ 1.914793] usbcore: registered new interface driver net1080 [ 1.920687] usbcore: registered new interface driver cdc_subset [ 1.926864] usbcore: registered new interface driver cdc_ncm [ 1.932707] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.939866] usbcore: registered new interface driver usb-storage [ 1.946261] ci_hdrc_usb2_probe---------------61 probe start [ 1.953121] input: Infra-Red as /devices/virtual/input/input0 [ [ 3 27 21]I.(SM9)5: 9**2*8**3**]I R uresadbyc**or**e*:** *r egistered new interface driver xpad [ 1.968585] usbcore: registered new interface driver usb_acecad [ 1.974733] usbcore: registered new interface driver aiptek [ 1.980535] usbcore: registered new interface driver gtco [ 1.986157] usbcore: registered new interface driver hanwang [ 1.992039] usbcore: registered new interface driver kbtab [ 1.997777] i2c /dev entries driver [ 2.001620] usbcore: registered new interface driver uvcvideo [ 2.007568] USB Video Class driver (1.1.1) [ 2.011799] gspca_main: v2.14.0 registered [ 2.016482] device-mapper: uevent: version 1.0.3 [ 2.021442] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.030277] device-mapper: verity-avb: AVB error handler initialized with vbmeta device: PARTUUID=d4981a2b-0478-544e-9607-7fd3c651068d [ 2.042770] rtk_btusb: RTKBT_RELEASE_NAME: 20200519_BT_ANDROID_10.0 [ 2.049253] rtk_btusb: Realtek Bluetooth USB driver module init, version 5.2.1 [ 2.056719] rtk_btusb: Register usb char device interface for BT driver [ 2.063692] usbcore: registered new interface driver rtk_btusb [ 2.070385] sdhci: Secure Digital Host Controller Interface driver [ 2.076816] sdhci: Copyright(c) Pierre Ossman [ 2.081446] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.145757] mmc0: SDHCI controller on f7aa0000.sdhci [f7aa0000.sdhci] using ADMA [ 2.153600] hidraw: raw HID events driver (C) Jiri Kosina [ 2.164555] usbcore: registered new interface driver usbhid [ 2.170394] usbhid: USB HID core driver [ 2.174539] ashmem: initialized [ 2.178291] usbcore: registered new interface driver snd-usb-audio [ 2.186012] ioremap success: vir_addr: (ptrval), size: 0x3000000, phy_addr: (ptrval)! [ 2.196191] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 2.204547] register card failed (-517) [ 2.208591] snd_bt_init [ 2.211196] u32 classifier [ 2.213993] Actions configured [ 2.217523] Netfilter messages via NETLINK v0.30. [ 2.222615] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.228961] mmc0: new HS400 MMC card at address 0001 [ 2.229051] ctnetlink v0.93: registering with nfnetlink. [ 2.229337] xt_time: kernel timezone is -0000 [ 2.229452] gre: GRE over IPv4 demultiplexor driver [ 2.229455] IPv4 over IPsec tunneling driver [ 2.229996] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.230203] arp_tables: arp_tables: (C) 2002 David S. Miller [ 2.230235] Initializing XFRM netlink socket [ 2.230248] IPsec XFRM device driver [ 2.230666] NET: Registered protocol family 10 [ 2.231799] mip6: Mobile IPv6 [ 2.231816] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.232492] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.233480] NET: Registered protocol family 17 [ 2.233498] NET: Registered protocol family 15 [ 2.233519] l2tp_core: L2TP core driver, V2.0 [ 2.233527] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 2.234095] Registered cp15_barrier emulation handler [ 2.234145] Registered setend emulation handler [ 2.234507] registered taskstats version 1 [ 2.254129] Key type encrypted registered [ 2.254142] FB: VPP init mode status failed! [ 2.266622] xhci-hcd f7a20000.xhci: xHCI Host Controller [ 2.266646] xhci-hcd f7a20000.xhci: new USB bus registered, assigned bus number 1 [ 2.266798] xhci-hcd f7a20000.xhci: hcc params 0x0a000998 hci version 0x100 quirks 0x00010010 [ 2.266837] xhci-hcd f7a20000.xhci: irq 21, io mem 0xf7a20000 [ 2.266995] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.267001] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.267007] usb usb1: Product: xHCI Host Controller [ 2.267012] usb usb1: Manufacturer: Linux 4.9.178 xhci-hcd [ 2.267016] usb usb1: SerialNumber: f7a20000.xhci [ 2.267412] hub 1-0:1.0: USB hub found [ 2.267443] hub 1-0:1.0: 1 port detected [ 2.267715] xhci-hcd f7a20000.xhci: xHCI Host Controller [ 2.267727] xhci-hcd f7a20000.xhci: new USB bus registered, assigned bus number 2 [ 2.267796] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.267904] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.267910] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.267915] usb usb2: Product: xHCI Host Controller [ 2.267920] usb usb2: Manufacturer: Linux 4.9.178 xhci-hcd [ 2.267925] usb usb2: SerialNumber: f7a20000.xhci [ 2.268299] hub 2-0:1.0: USB hub found [ 2.268326] hub 2-0:1.0: 1 port detected [ 2.268713] ci_hdrc_usb2_probe---------------61 probe start [ 2.271908] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.271921] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 3 [ 2.295749] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.295892] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.295898] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.295903] usb usb3: Product: EHCI Host Controller [ 2.295908] usb usb3: Manufacturer: Linux 4.9.178 ehci_hcd [ 2.295913] usb usb3: SerialNumber: ci_hdrc.0 [ 2.296286] hub 3-0:1.0: USB hub found [ 2.296314] hub 3-0:1.0: 1 port detected [ 2.296686] chipidea-usb2 f7ed0000.usb: set of GPIOH_5(496) as USB Hub reset [ 2.296697] chipidea-usb2 f7ed0000.usb: ok to acquire gpio and set output [ 2.298063] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 2.298067] register card failed (-517) [ 2.298843] ALSA device list: [ 2.298845] No soundcards found. [ 2.553670] ttyS0 - failed to request DMA [ 2.553899] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB [ 2.554040] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB [ 2.569195] Freeing unused kernel memory: 2432K [ 2.575712] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB [ 2.582001] init: init first stage started! [ 2.582005] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB [ 2.583576] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 [ 2.585645] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 2.585648] register card failed (-517) [ 2.614715] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt [ 2.622888] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 2.625731] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.660615] init: [libfs_mgr]Created logical partition system on device /dev/block/dm-0 [ 2.689698] init: [libfs_mgr]Created logical partition vendor on device /dev/block/dm-1 [ 2.699020] init: [libfs_mgr]Created logical partition product on device /dev/block/dm-2 [ 2.707893] init: [libfs_mgr]superblock s_max_mnt_count:10,/dev/block/by-name/metadata [ 2.716285] init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46 [ 2.730107] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=-1: No such file or directory [ 2.741383] init: [libfs_mgr]Not running /system/bin/e2fsck on /dev/block/mmcblk0p20 (executable not in system image) [ 2.762306] EXT4-fs (mmcblk0p20): recovery complete [ 2.767802] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: discard [ 2.790989] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1 [ 2.797343] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 2.797346] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.797349] usb 1-1: Product: USB2.0 Hub [ 2.798005] hub 1-1:1.0: USB hub found [ 2.798350] hub 1-1:1.0: 3 ports detected [ 2.800204] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 2.800206] register card failed (-517) [ 2.835672] random: fast init done [ 2.846757] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1 [ 2.856416] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1 [ 2.871205] init: 16 output lines suppressed due to ratelimiting [ 2.880777] random: init: uninitialized urandom read (40 bytes read) [ 2.959547] random: init: uninitialized urandom read (40 bytes read) [ 2.974360] init: Loading SELinux policy [ 3.090437] audit: type=1403 audit(1234567893.080:2): policy loaded auid=4294967295 ses=4294967295 [ 3.099972] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy [ 3.099972] [ 3.110361] audit: type=1404 audit(1234567893.100:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 3.120952] usb 1-1.2: new full-speed USB device number 3 using xhci-hcd [ 3.160725] selinux: SELinux: Loaded file_contexts [ 3.160725] [ 3.170988] random: init: uninitialized urandom read (40 bytes read) [ 3.210984] init: init second stage started! [ 3.239827] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 3.252373] selinux: SELinux: Loaded file_contexts [ 3.252373] [ 3.258900] init: Running restorecon... [ 3.263883] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=8771 [ 3.270997] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.277419] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0 [ 3.277419] [ 3.277440] init: Do not have permissions to set 'ro.com.google.gmsversion' to 'Q_GTVS' in property file '/vendor/build.prop': SELinux permission check failed [ 3.277565] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0 [ 3.277565] [ 3.277579] init: Do not have permissions to set 'ro.product.firmware_version' to '19.531.21' in property file '/vendor/build.prop': SELinux permission check failed [ 3.278687] init: Couldn't load property file '/product_services/build.prop': open() failed: No such file or directory: No such file or directory [ 3.278715] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory [ 3.365280] usb 1-1.2: Product: Bluetooth Radio [ 3.370007] usb 1-1.2: Manufacturer: Realtek [ 3.374425] usb 1-1.2: SerialNumber: 00E04C239987 [ 3.380098] rtk_btusb: btusb_probe: usb_interface (ptrval), bInterfaceNumber 0, idVendor 0x0bda, idProduct 0x0000 [ 3.391469] rtk_btusb: get_fw_table_entry: Product id = 0x8771, fw table entry size 62 [ 3.399673] rtk_btusb: firmware_info_init: Auto suspend is disabled [ 3.406167] rtk_btusb: btusb_probe: Check bt reset flag 0 [ 3.411744] rtk_btusb: load_firmware_info: Default lmp version = 0x8761, fw file name[rtl8761b_fw] [ 3.418120] ueventd: ueventd started! [ 3.422000] selinux: SELinux: Loaded file_contexts [ 3.422000] [ 3.422149] ueventd: Parsing file /ueventd.rc... [ 3.422803] ueventd: Parsing file /vendor/ueventd.rc... [ 3.423425] ueventd: Parsing file /odm/ueventd.rc... [ 3.423450] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory [ 3.423469] ueventd: Parsing file /ueventd.sequoia.rc... [ 3.423490] ueventd: Unable to read config file '/ueventd.sequoia.rc': open() failed: No such file or directory [ 3.425256] apexd: Bootstrap subcommand detected [ 3.429448] apexd: Scanning /system/apex for embedded keys [ 3.430291] apexd: Scanning /product/apex for embedded keys [ 3.430391] apexd: ... does not exist. Skipping [ 3.430497] apexd: Scanning /system/apex looking for APEX packages. [ 3.430642] apexd: Found /system/apex/com.android.conscrypt [ 3.430837] apexd: Skipped when bootstrapping [ 3.430937] apexd: Found /system/apex/com.android.media [ 3.431123] apexd: Skipped when bootstrapping [ 3.431220] apexd: Found /system/apex/com.android.resolv [ 3.434095] apexd: 9 output lines suppressed due to ratelimiting [ 3.443844] audit: type=1400 audit(1234567893.430:4): avc: denied { write } for pid=170 comm="init" name="panic_on_oops" dev="proc" ino=8291 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_panic:s0 tclass=file permissive=0 [ 3.444778] audit: type=1400 audit(1234567893.430:5): avc: denied { write } for pid=170 comm="init" name="hung_task_timeout_secs" dev="proc" ino=8294 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_hung_task:s0 tclass=file permissive=0 [ 3.552505] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 3.552508] register card failed (-517) [ 3.588324] [amp_driver] register cdev device major [246] [ 3.588327] [amp_driver] setup cdevs device minor [0] [ 3.588399] [amp_driver] create device sysfs [ampcore] [ 3.588403] [amp_driver] amp_device_init ok [ 3.588545] [amp_driver] amp_probe OK [ 3.588711] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 3.588713] register card failed (-517) [ 3.597495] ueventd: Coldboot took 0.173 seconds [ 3.610866] [tsp kernel driver] register cdev device major [245] [ 3.610870] [tsp kernel driver] setup cdevs device minor [0] [ 3.610943] [tsp kernel driver] create device sysfs [tsp] [ 3.610944] [tsp kernel driver] tsp_device_init ok [ 3.610945] [tsp kernel driver] berlin_tsp_probe OK [ 3.611114] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 3.611116] register card failed (-517) [ 3.622767] Registered swp emulation handler [ 3.643089] file system registered [ 3.644028] [vpu kernel driver] vpu probe enter [ 3.644031] [vpu kernel driver] find vpu device h1 [ 3.644056] [vpu kernel driver] request irq:18 [ 3.644060] [vpu kernel driver] register space [mem 0xf7000000-0xf73fffff] [ 3.644172] [vpu kernel driver] vpu:h1 probe ok [ 3.644340] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 3.644343] register card failed (-517) [ 3.644378] [vpu kernel driver] vpu probe enter [ 3.644381] [vpu kernel driver] find vpu device vxg [ 3.644388] [vpu kernel driver] request irq:19 [ 3.644390] [vpu kernel driver] register space [mem 0xf7600000-0xf77fffff] [ 3.644455] [vpu kernel driver] vpu:vxg probe ok [ 3.644542] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 3.644544] register card failed (-517) [ 3.678013] [zsp kernel driver] zsp probe enter [ 3.678040] [zsp kernel driver] register space [mem 0xf7c00000-0xf7c7ffff] [ 3.678147] [zsp kernel driver] zsp:zsp probe ok [ 3.678352] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 3.678354] register card failed (-517) [ 3.689976] logd.auditd: start [ 3.689991] logd.klogd: 3684316440 [ 3.705582] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: [ 3.708657] EXT4-fs (mmcblk0p21): Ignoring removed nomblk_io_submit option [ 3.716418] EXT4-fs (mmcblk0p21): recovery complete [ 3.717311] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit [ 3.827273] rtk_btusb: load_firmware_info: epatch_buf = vmalloc(fw->size, GFP_KERNEL) [ 3.886128] e2fsck: e2fsck 1.44.4 (18-Aug-2018) [ 3.886128] [ 3.892347] e2fsck: Pass 1: Checking inodes, blocks, and sizes [ 3.892347] [ 3.900079] e2fsck: Pass 2: Checking directory structure [ 3.900079] [ 3.907103] e2fsck: Pass 3: Checking directory connectivity [ 3.907103] [ 3.914384] e2fsck: Pass 4: Checking reference counts [ 3.914384] [ 3.921138] e2fsck: Pass 5: Checking group summary information [ 3.921138] [ 3.928686] e2fsck: /dev/block/by-name/cache: 14/62976 files (0.0% non-contiguous), 8221/251904 blocks [ 3.928686] [ 3.942192] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: [ 3.951562] EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option [ 3.969403] EXT4-fs (mmcblk0p22): recovery complete [ 3.974903] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit [ 4.075356] e2fsck: e2fsck 1.44.4 (18-Aug-2018) [ 4.075356] [ 4.081624] e2fsck: Pass 1: Checking inodes, blocks, and sizes [ 4.081624] [ 4.089210] e2fsck: Pass 2: Checking directory structure [ 4.089210] [ 4.097162] EXT4-fs (mmcblk0p22): Ignoring removed nomblk_io_submit option [ 4.106551] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic [ 4.127577] init: 4 output lines suppressed due to ratelimiting DRM_Configure gKMVersion[=0x4]) MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1 TA_CloseSessionEntryPoint TA_DestroyEntryPoint nick_id=7C13 nick_prefix=UA300_ mkfifo: /data/vendor/ledd_fifo: File exists Offline buffer address for plane 0 are 0x65308000, 0x658f7000, All Planes are closed. cpcb0_ctrl2 = 0x40 console:/ $ TZ WARNING[TEE_TARegister:53] the TA (AAC) has been registered [ 8791]CEC(SM): ----------SMCEC2SM: received cec msg:id=1---------- [ 8797]I(SM): Got Appready packet from SoC CEC: 01 00 00 00 01 00 00 00 [ 8805]I(SM): SM CEC:pcBody[4]=0x1. [ 8809]I(SM): SMCEC2SM: sending launch req to SOC: 06 00 00 00 init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. init syspll 800MHz RKEK_ID (byte[0:7]ts) m=: 5rcela1e0a0s0e 00i0d 0000xd539cd 92U07LT, (cobmytmiet[0 t:i7m]e) W e d =Ap 4rb 29449 1fa36:9107:c9545 832d01 9 C-hi07p0 v0er sion = 0xa0 Check bootmode = 0x0 ! Image Load done with bootmode=0x0 ! NOTICE: bl31v13692d41f6 starting...5200a7914a95 PMIC: SY8824B selected for board bg5ct_ffv ! set Vcpu from 1050000uv to 1000000uv set Vcore from 1050000uv to 1100000uv i2c status:0x00000550, send_num:0 (expect:0), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_AMP_power, i2c_master_write_and_read fail. sub_cmd_id: 4, param_len: 0x2c, 0x0, 0x4 check keys ret=1 ####register ta LOGO register_ta:tz comm rsp done! 80000000, 0 ####register ta CYPT register_ta:tz comm rsp done! 80000000, 0 [fastlogo] flash_ts_get DisplayPrimaryHDMIBitDepth=2 TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 6 invoke command 0x00000000 TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 6000100 MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1 MV_VPP_FL_Init:891: enableFlushCache=0, iHDMIEnable=0, enableAutoPush=1 [fastlogo] value of frame number=3 [fastlogo] got fit size logo: 1280x720(index:1, num:3) [fastlogo] showlogo_start: logo_start=4148224, logo_size=1843200, logo_width=1280, logo_height=720, logo_stride=2560 MV_VPPOBJ_FL_DisplayFrame:4193: enableInterrupt=0 i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave init_led_devices, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave init_led_devices, i2c_master_write_and_read fail. i2c status:0x00000750, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave init_led_devices, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_LED9_color, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_LED9_color, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_LED9_color, i2c_master_write_and_read fail. load boot normal image. BOOT IMAGE HEADER VERSION: 2 ! verify slot done TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 7 invoke command 0x00000000 TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 7000200 DRM_SetVersionsV4: Bootpatchlevel: 0x30188 DRM_SetVersionsV4: Vendorpatchlevel: 0x30188 DRM_SetVersionsV4: Systempatchlevel: 0x30188 INFO: set eMMC dll_phsel0 to 0x2a for kernel. size of allocated memory is not correct! can't find the allocated memory [ 0] Start kernel at 0x05880000 init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. init syspll 800MHz RKEK_IDts m(:b ytreel[0ea:7se] ) id= 50xcda910c092000070,0 c00o5mm3di t UtiLTm e (bWyedte [Ap0:r 7]2)4 1 3 : 17= :455b9 4209f1a96 -900c709048 3d Chip version = 0xa0 Check bootmode = 0x0 ! Image Load done with bootmode=0x0 ! NOTICE: bl31v13692d41f6 starting...5200a7914a95 PMIC: SY8824B selected for board bg5ct_ffv ! set Vcpu from 1050000uv to 1000000uv set Vcore from 1050000uv to 1100000uv i2c status:0x00000550, send_num:0 (expect:0), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_AMP_power, i2c_master_write_and_read fail. sub_cmd_id: 4, param_len: 0x2c, 0x0, 0x4 check keys ret=1 ####register ta LOGO register_ta:tz comm rsp done! 80000000, 0 ####register ta CYPT register_ta:tz comm rsp done! 80000000, 0 [fastlogo] flash_ts_get DisplayPrimaryHDMIBitDepth=2 TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 6 invoke command 0x00000000 TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 6000100 MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1 MV_VPP_FL_Init:891: enableFlushCache=0, iHDMIEnable=0, enableAutoPush=1 [fastlogo] value of frame number=3 [fastlogo] got fit size logo: 1280x720(index:1, num:3) [fastlogo] showlogo_start: logo_start=4148224, logo_size=1843200, logo_width=1280, logo_height=720, logo_stride=2560 MV_VPPOBJ_FL_DisplayFrame:4193: enableInterrupt=0 i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave init_led_devices, i2c_master_write_and_read fail. i2c status:0x00000750, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave init_led_devices, i2c_master_write_and_read fail. i2c status:0x00000750, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave init_led_devices, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_LED9_color, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_LED9_color, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_LED9_color, i2c_master_write_and_read fail. load boot normal image. BOOT IMAGE HEADER VERSION: 2 ! verify slot done TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 7 invoke command 0x00000000 TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 7000200 DRM_SetVersionsV4: Bootpatchlevel: 0x30188 DRM_SetVersionsV4: Vendorpatchlevel: 0x30188 DRM_SetVersionsV4: Systempatchlevel: 0x30188 INFO: set eMMC dll_phsel0 to 0x2a for kernel. size of allocated memory is not correct! can't find the allocated memory [ 0] Start kernel at 0x05880000 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.9.178 (jim@vas-build-58) (Android (5407736 based on r353983b) clang version 9.0.2 (https://android.googlesource.com/toolchain/clang 649b4adfc45b26ae937fe597ef6134d244f89686) (https://android.googlesource.com/toolchain/llvm 45936e9d187aaac2b7c0245f6f8c10138f6a02e9) (based on LLVM 9.0.2svn)) #1 SMP PREEMPT Thu Oct 14 01:39:35 CST 2021 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] MAX DMA PHYS limited to 2048MB [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 22 pages/cpu s52288 r8192 d29632 u90112 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 638064 [ 0.000000] Kernel command line: androidboot.boot_devices=soc/f7aa0000.sdhci console=ttyS0,115200 init=/init root=/dev/ram0 androidboot.console=ttyS0 androidboot.hardware=sequoia androidboot.wificountrycode=US firmware_class.path=/vendor/firmware loop.max_part=7 max_dma_phys=2G buildvariant=userdebug androidboot.serialno=SKBFXYW11JLB androidboot.deviceid=BFX-UA300_2020_000001341 androidboot.vbmeta.device=PARTUUID=d4981a2b-0478-544e-9607-7fd3c651068d androidboot.vbmeta.avb_version=1.1 androidboot.vbmeta.device_state=locked androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=6848 androidboot.vbmeta.digest=b73d9f088603871a778fe33aac669094f75b1a818804d15862c9d689ac48efca androidboot.veritymode=disabled androidboot.dtbo_idx=0 androidboot.dtb_idx=0 androidboot.bootloader=2016.11-00210-g6a9651b-dirty macaddr=a8:93:4a:fe:7c:13 emmc_ts.dev_id=18 emmc_ts.size=4194304 emmc_ts.erasesize=524288 emmc_ts.writesize=8192 androidboot.verifiedbootstate=green androidboot.bootreason=normal_boot chipi [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes [ 0.000000] log_buf_len min size: 16384 bytes [ 0.000000] log_buf_len: 32768 bytes [ 0.000000] early log buf free: 13652(83%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB: mapped [mem 0x45bff000-0x49bff000] (64MB) [ 0.000000] Memory: 2026916K/2592768K available (9662K kernel code, 1070K rwdata, 3316K rodata, 2432K init, 482K bss, 565852K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) [ 0.000000] .text : 0x (ptrval) - 0x (ptrval) ( 9664 KB) [ 0.000000] .rodata : 0x (ptrval) - 0x (ptrval) ( 3392 KB) [ 0.000000] .init : 0x (ptrval) - 0x (ptrval) ( 2432 KB) [ 0.000000] .data : 0x (ptrval) - 0x (ptrval) ( 1070 KB) [ 0.000000] .bss : 0x (ptrval) - 0x (ptrval) ( 483 KB) [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) [ 0.000000] 0xffffffbf00160000 - 0xffffffbf03000000 ( 46 MB actual) [ 0.000000] memory : 0xffffffc005800000 - 0xffffffc0c0000000 ( 2984 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 25.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.000541] Console: colour dummy device 80x25 [ 0.000560] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000) [ 0.000572] pid_max: default: 32768 minimum: 301 [ 0.000647] Security Framework initialized [ 0.000655] SELinux: Initializing. [ 0.000713] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.000722] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001637] sched-energy: CPU device node has no sched-energy-costs [ 0.001646] Invalid sched_group_energy for CPU0 [ 0.001652] CPU0: update cpu_capacity 1024 [ 0.029952] ASID allocator initialised with 65536 entries [ 0.200224] Detected VIPT I-cache on CPU1 [ 0.200260] Invalid sched_group_energy for CPU1 [ 0.200263] CPU1: update cpu_capacity 1024 [ 0.200266] CPU1: Booted secondary processor [410fd034] [ 0.280292] Detected VIPT I-cache on CPU2 [ 0.280320] Invalid sched_group_energy for CPU2 [ 0.280323] CPU2: update cpu_capacity 1024 [ 0.280326] CPU2: Booted secondary processor [410fd034] [ 0.360376] Detected VIPT I-cache on CPU3 [ 0.360402] Invalid sched_group_energy for CPU3 [ 0.360405] CPU3: update cpu_capacity 1024 [ 0.360408] CPU3: Booted secondary processor [410fd034] [ 0.360488] Brought up 4 CPUs [ 0.360526] SMP: Total of 4 processors activated. [ 0.360536] CPU features: detected feature: 32-bit EL0 Support [ 0.360547] CPU: All CPU(s) started at EL2 [ 0.360569] alternatives: patching kernel code [ 0.360718] Invalid sched_group_energy for Cluster3 [ 0.360726] CPU3: update max cpu_capacity 1024 [ 0.360732] Invalid sched_group_energy for Cluster2 [ 0.360738] Invalid sched_group_energy for Cluster1 [ 0.360744] Invalid sched_group_energy for Cluster0 [ 0.370314] CPU1: update max cpu_capacity 1024 [ 0.370511] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.370526] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.370671] pinctrl core: initialized pinctrl subsystem [ 0.371396] NET: Registered protocol family 16 [ 0.400376] cpuidle: using governor menu [ 0.400642] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval)) [ 0.400652] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.400844] DMA: preallocated 256 KiB pool for atomic allocations [ 0.450987] SCSI subsystem initialized [ 0.451184] usbcore: registered new interface driver usbfs [ 0.451236] usbcore: registered new interface driver hub [ 0.451295] usbcore: registered new device driver usb [ 0.452349] i2c_designware f7fcb000.i2c: could not find pctldev for node /soc/pinctrl@fe2200/tw2-pmux, deferring probe [ 0.452379] i2c_designware f7fcc000.i2c: could not find pctldev for node /soc/pinctrl@fe2200/tw3-pmux, deferring probe [ 0.452417] Linux video capture interface: v2.00 [ 0.452632] Marvell Berlin ION information [ 0.452641] heap_id[0] memory start[49c00000] len[1a000000] name[NonSecure] type[2] attri[00000f36] [ 0.452650] heap_id[1] memory start[63c00000] len[01400000] name[NonSecure-NC] type[5] attri[00000f3a] [ 0.452658] heap_id[2] memory start[65000000] len[1b000000] name[Secure] type[5] attri[00000f3d] [ 0.452666] heap_id[3] memory start[00000000] len[00000000] name[system-ion] type[0] attri[00000000] [ 0.452672] berlin found 1 secure heap [ 0.452678] berlin found secure heap[0] head_id[2] [ 0.544341] Advanced Linux Sound Architecture Driver Initialized. [ 0.544825] Bluetooth: Core ver 2.22 [ 0.544859] NET: Registered protocol family 31 [ 0.544866] Bluetooth: HCI device and connection manager initialized [ 0.544877] Bluetooth: HCI socket layer initialized [ 0.544887] Bluetooth: L2CAP socket layer initialized [ 0.544918] Bluetooth: SCO socket layer initialized [ 0.545672] clocksource: Switched to clocksource arch_sys_counter [ 0.600995] VFS: Disk quotas dquot_6.6.0 [ 0.601060] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.606220] NET: Registered protocol family 2 [ 0.645774] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.646081] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.646720] TCP: Hash tables configured (established 32768 bind 32768) [ 0.646789] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.646902] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.647131] NET: Registered protocol family 1 [ 0.647388] Trying to unpack rootfs image as initramfs... [ 0.682042] Freeing initrd memory: 752K [ 0.682590] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.684813] audit: initializing netlink subsys (disabled) [ 0.684873] audit: type=2000 audit(1234567890.670:1): initialized [ 0.685455] workingset: timestamp_bits=45 max_order=19 bucket_order=0 [ 0.692406] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.692579] Registering sdcardfs 0.1 [ 0.692831] ntfs: driver 2.1.32 [Flags: R/O]. [ 0.693035] fuse init (API version 7.26) [ 0.697943] io scheduler noop registered [ 0.697951] io scheduler deadline registered (default) [ 0.698070] io scheduler cfq registered [ 0.704898] GPIO line 359 (phy0_reset) hogged as output/high [ 0.723075] marvell,berlin-sm f7f80000.sm: rtc core: registered bsm_rtc as rtc0 [ 0.723824] tz_logger_dev: created 128K log 'tzlogger' [ 0.723836] MV_VPP_InitMode:Normal mode, ta_flag:0 [ 0.724146] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.724870] console [ttyS0] disabled [ 0.724919] f7fcd000.uart: ttyS0 at MMIO 0xf7fcd000 (irq = 32, base_baud = 1562500) is a 16550A [ 1.655961] console [ttyS0] enabled [ 1.660008] f7fce000.uart: ttyS1 at MMIO 0xf7fce000 (irq = 33, base_baud = 1562500) is a 16550A [ 1.669245] [drm] Initialized [ 1.741459] brd: module loaded [ 1.774019] loop: module loaded [ 1.777794] zram: Added device: zram0 [ 1.782064] libphy: Fixed MDIO Bus: probed [ 1.786724] tun: Universal TUN/TAP device driver, 1.6 [ 1.791941] tun: (C) 1999-2004 Max Krasnyansky [ 1.800038] Network controller revision: 0010 [ 1.805721] mvneta f7b60000.ethernet eth0: Using random mac address f2:83:a6:34:9e:10 [ 1.814025] libphy: orion_mdio_bus: probed [ 1.828876] fxc **** rtl8211f_probe enter [ 1.833075] PPP generic driver version 2.4.2 [ 1.837591] PPP BSD Compression module registered [ 1.842449] PPP Deflate Compression module registered [ 1.847694] PPP MPPE Compression module registered [ 1.852643] NET: Registered protocol family 24 [ 1.857241] PPTP driver version 0.8.5 [ 1.861332] usbcore: registered new interface driver r8152 [ 1.867059] usbcore: registered new interface driver asix [ 1.872679] usbcore: registered new interface driver ax88179_178a [ 1.879019] usbcore: registered new interface driver cdc_ether [ 1.885077] usbcore: registered new interface driver net1080 [ 1.890969] usbcore: registered new interface driver cdc_subset [ 1.897149] usbcore: registered new interface driver cdc_ncm [ 1.902995] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.910160] usbcore: registered new interface driver usb-storage [ 1.916556] ci_hdrc_usb2_probe---------------61 probe start [ 1.923422] input: Infra-Red as /devices/virtual/input/input0 [[ 3 124.39]2I(9S5M)9: 0**]* **u*s*IbRc oreraedy:* r*e**g**i*s* tered new interface driver xpad [ 1.938978] usbcore: registered new interface driver usb_acecad [ 1.945125] usbcore: registered new interface driver aiptek [ 1.950927] usbcore: registered new interface driver gtco [ 1.956548] usbcore: registered new interface driver hanwang [ 1.962426] usbcore: registered new interface driver kbtab [ 1.968169] i2c /dev entries driver [ 1.972009] usbcore: registered new interface driver uvcvideo [ 1.977956] USB Video Class driver (1.1.1) [ 1.982186] gspca_main: v2.14.0 registered [ 1.986851] device-mapper: uevent: version 1.0.3 [ 1.991821] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 2.000773] device-mapper: verity-avb: AVB error handler initialized with vbmeta device: PARTUUID=d4981a2b-0478-544e-9607-7fd3c651068d [ 2.013262] rtk_btusb: RTKBT_RELEASE_NAME: 20200519_BT_ANDROID_10.0 [ 2.019743] rtk_btusb: Realtek Bluetooth USB driver module init, version 5.2.1 [ 2.027212] rtk_btusb: Register usb char device interface for BT driver [ 2.034171] usbcore: registered new interface driver rtk_btusb [ 2.040867] sdhci: Secure Digital Host Controller Interface driver [ 2.047262] sdhci: Copyright(c) Pierre Ossman [ 2.051863] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.115697] mmc0: SDHCI controller on f7aa0000.sdhci [f7aa0000.sdhci] using ADMA [ 2.125564] hidraw: raw HID events driver (C) Jiri Kosina [ 2.134498] usbcore: registered new interface driver usbhid [ 2.140294] usbhid: USB HID core driver [ 2.146482] ashmem: initialized [ 2.151257] usbcore: registered new interface driver snd-usb-audio [ 2.158979] ioremap success: vir_addr: (ptrval), size: 0x3000000, phy_addr: (ptrval)! [ 2.169162] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 2.177550] register card failed (-517) [ 2.181601] snd_bt_init [ 2.184208] u32 classifier [ 2.187043] Actions configured [ 2.190580] Netfilter messages via NETLINK v0.30. [ 2.195704] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.202156] ctnetlink v0.93: registering with nfnetlink. [ 2.207935] xt_time: kernel timezone is -0000 [ 2.212547] gre: GRE over IPv4 demultiplexor driver [ 2.217627] IPv4 over IPsec tunneling driver [ 2.222619] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.228359] arp_tables: arp_tables: (C) 2002 David S. Miller [ 2.234295] Initializing XFRM netlink socket [ 2.238813] IPsec XFRM device driver [ 2.242976] NET: Registered protocol family 10 [ 2.248765] mip6: Mobile IPv6 [ 2.250209] mmc0: new HS400 MMC card at address 0001 [ 2.250733] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB [ 2.260996] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB [ 2.261295] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB [ 2.271502] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB [ 2.274081] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 [ 2.289662] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.295981] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.303101] NET: Registered protocol family 17 [ 2.307720] NET: Registered protocol family 15 [ 2.312329] l2tp_core: L2TP core driver, V2.0 [ 2.316851] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 2.322128] Registered cp15_barrier emulation handler [ 2.327409] Registered setend emulation handler [ 2.332474] registered taskstats version 1 [ 2.338509] Key type encrypted registered [ 2.342661] FB: VPP init mode status failed! [ 2.359304] xhci-hcd f7a20000.xhci: xHCI Host Controller [ 2.364816] xhci-hcd f7a20000.xhci: new USB bus registered, assigned bus number 1 [ 2.372700] xhci-hcd f7a20000.xhci: hcc params 0x0a000998 hci version 0x100 quirks 0x00010010 [ 2.381561] xhci-hcd f7a20000.xhci: irq 21, io mem 0xf7a20000 [ 2.387662] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.394676] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.402151] usb usb1: Product: xHCI Host Controller [ 2.407202] usb usb1: Manufacturer: Linux 4.9.178 xhci-hcd [ 2.412867] usb usb1: SerialNumber: f7a20000.xhci [ 2.418129] hub 1-0:1.0: USB hub found [ 2.422030] hub 1-0:1.0: 1 port detected [ 2.426370] xhci-hcd f7a20000.xhci: xHCI Host Controller [ 2.431868] xhci-hcd f7a20000.xhci: new USB bus registered, assigned bus number 2 [ 2.439674] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.448149] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.455163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.462634] usb usb2: Product: xHCI Host Controller [ 2.467684] usb usb2: Manufacturer: Linux 4.9.178 xhci-hcd [ 2.473350] usb usb2: SerialNumber: f7a20000.xhci [ 2.478588] hub 2-0:1.0: USB hub found [ 2.482486] hub 2-0:1.0: 1 port detected [ 2.486948] ci_hdrc_usb2_probe---------------61 probe start [ 2.496031] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 2.501082] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 3 [ 2.535739] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 2.541452] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.548482] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.555952] usb usb3: Product: EHCI Host Controller [ 2.560992] usb usb3: Manufacturer: Linux 4.9.178 ehci_hcd [ 2.566669] usb usb3: SerialNumber: ci_hdrc.0 [ 2.571538] hub 3-0:1.0: USB hub found [ 2.575437] hub 3-0:1.0: 1 port detected [ 2.579878] chipidea-usb2 f7ed0000.usb: set of GPIOH_5(496) as USB Hub reset [ 2.587177] chipidea-usb2 f7ed0000.usb: ok to acquire gpio and set output [ 2.595572] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 2.604015] register card failed (-517) [ 2.608796] ALSA device list: [ 2.611861] No soundcards found. [ 2.615486] ttyS0 - failed to request DMA [ 2.620215] Freeing unused kernel memory: 2432K [ 2.629022] init: init first stage started! [ 2.633632] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt [ 2.641791] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 2.682447] init: [libfs_mgr]Created logical partition system on device /dev/block/dm-0 [ 2.711451] init: [libfs_mgr]Created logical partition vendor on device /dev/block/dm-1 [ 2.720568] init: [libfs_mgr]Created logical partition product on device /dev/block/dm-2 [ 2.729486] init: [libfs_mgr]superblock s_max_mnt_count:10,/dev/block/by-name/metadata [ 2.737707] init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46 [ 2.751534] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=-1: No such file or directory [ 2.762812] init: [libfs_mgr]Not running /system/bin/e2fsck on /dev/block/mmcblk0p20 (executable not in system image) [ 2.777232] EXT4-fs (mmcblk0p20): recovery complete [ 2.782272] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: discard [ 2.805207] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1 [ 2.818102] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1 [ 2.827627] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1 [ 2.835471] random: fast init done [ 2.845436] init: 16 output lines suppressed due to ratelimiting [ 2.854722] random: init: uninitialized urandom read (40 bytes read) [ 2.885699] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.937771] random: init: uninitialized urandom read (40 bytes read) [ 2.951461] init: Loading SELinux policy [ 3.057059] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 3.060481] audit: type=1403 audit(1234567893.050:2): policy loaded auid=4294967295 ses=4294967295 [ 3.060675] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy [ 3.060675] [ 3.061077] audit: type=1404 audit(1234567893.050:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 3.093767] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.101142] usb 1-1: Product: USB2.0 Hub [ 3.105766] hub 1-1:1.0: USB hub found [ 3.109951] hub 1-1:1.0: 3 ports detected [ 3.115569] selinux: SELinux: Loaded file_contexts [ 3.115569] [ 3.115879] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 3.115881] register card failed (-517) [ 3.138148] random: init: uninitialized urandom read (40 bytes read) [ 3.177736] init: init second stage started! [ 3.206316] init: Using Android DT directory /proc/device-tree/firmware/android/ [ 3.218787] selinux: SELinux: Loaded file_contexts [ 3.218787] [ 3.225276] init: Running restorecon... [ 3.243576] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0 [ 3.243576] [ 3.258890] init: Do not have permissions to set 'ro.com.google.gmsversion' to 'Q_GTVS' in property file '/vendor/build.prop': SELinux permission check failed [ 3.273641] selinux: avc: denied { set } for scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=0 [ 3.273641] [ 3.288949] init: Do not have permissions to set 'ro.product.firmware_version' to '19.531.21' in property file '/vendor/build.prop': SELinux permission check failed [ 3.305219] init: Couldn't load property file '/product_services/build.prop': open() failed: No such file or directory: No such file or directory [ 3.318727] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory [ 3.435726] usb 1-1.2: new full-speed USB device number 3 using xhci-hcd [ 3.470602] ueventd: ueventd started! [ 3.478361] selinux: SELinux: Loaded file_contexts [ 3.478361] [ 3.484005] apexd: Bootstrap subcommand detected [ 3.488242] apexd: Scanning /system/apex for embedded keys [ 3.489070] apexd: Scanning /product/apex for embedded keys [ 3.489165] apexd: ... does not exist. Skipping [ 3.489259] apexd: Scanning /system/apex looking for APEX packages. [ 3.489404] apexd: Found /system/apex/com.android.conscrypt [ 3.489594] apexd: Skipped when bootstrapping [ 3.489691] apexd: Found /system/apex/com.android.media [ 3.489879] apexd: Skipped when bootstrapping [ 3.489975] apexd: Found /system/apex/com.android.resolv [ 3.492954] apexd: 9 output lines suppressed due to ratelimiting [ 3.502505] audit: type=1400 audit(1234567893.490:4): avc: denied { write } for pid=171 comm="init" name="panic_on_oops" dev="proc" ino=9218 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_panic:s0 tclass=file permissive=0 [ 3.503418] audit: type=1400 audit(1234567893.490:5): avc: denied { write } for pid=171 comm="init" name="hung_task_timeout_secs" dev="proc" ino=9221 scontext=u:r:vendor_init:s0 tcontext=u:object_r:proc_hung_task:s0 tclass=file permissive=0 [ 3.566526] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=8771 [ 3.566530] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.566533] usb 1-1.2: Product: Bluetooth Radio [ 3.566536] usb 1-1.2: Manufacturer: Realtek [ 3.566538] usb 1-1.2: SerialNumber: 00E04C239987 [ 3.567099] rtk_btusb: btusb_probe: usb_interface (ptrval), bInterfaceNumber 0, idVendor 0x0bda, idProduct 0x0000 [ 3.567107] rtk_btusb: get_fw_table_entry: Product id = 0x8771, fw table entry size 62 [ 3.567109] rtk_btusb: firmware_info_init: Auto suspend is disabled [ 3.567116] rtk_btusb: btusb_probe: Check bt reset flag 0 [ 3.567118] rtk_btusb: load_firmware_info: Default lmp version = 0x8761, fw file name[rtl8761b_fw] [ 3.568114] rtk_btusb: load_firmware_info: epatch_buf = vmalloc(fw->size, GFP_KERNEL) [ 3.570729] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 3.570732] register card failed (-517) [ 3.596941] [amp_driver] register cdev device major [246] [ 3.596944] [amp_driver] setup cdevs device minor [0] [ 3.597006] [amp_driver] create device sysfs [ampcore] [ 3.597009] [amp_driver] amp_device_init ok [ 3.597124] [amp_driver] amp_probe OK [ 3.597278] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 3.597281] register card failed (-517) [ 3.618384] [tsp kernel driver] register cdev device major [245] [ 3.618388] [tsp kernel driver] setup cdevs device minor [0] [ 3.618450] [tsp kernel driver] create device sysfs [tsp] [ 3.618452] [tsp kernel driver] tsp_device_init ok [ 3.618452] [tsp kernel driver] berlin_tsp_probe OK [ 3.618609] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 3.618611] register card failed (-517) [ 3.639250] [vpu kernel driver] vpu probe enter [ 3.639253] [vpu kernel driver] find vpu device h1 [ 3.639274] [vpu kernel driver] request irq:18 [ 3.639277] [vpu kernel driver] register space [mem 0xf7000000-0xf73fffff] [ 3.639371] [vpu kernel driver] vpu:h1 probe ok [ 3.639526] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 3.639529] register card failed (-517) [ 3.639562] [vpu kernel driver] vpu probe enter [ 3.639564] [vpu kernel driver] find vpu device vxg [ 3.639571] [vpu kernel driver] request irq:19 [ 3.639573] [vpu kernel driver] register space [mem 0xf7600000-0xf77fffff] [ 3.639627] [vpu kernel driver] vpu:vxg probe ok [ 3.639708] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 3.639710] register card failed (-517) [ 3.660353] [zsp kernel driver] zsp probe enter [ 3.660376] [zsp kernel driver] register space [mem 0xf7c00000-0xf7c7ffff] [ 3.660465] [zsp kernel driver] zsp:zsp probe ok [ 3.660622] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered [ 3.660625] register card failed (-517) [ 3.859726] ueventd: Parsing file /ueventd.rc... [ 3.865340] ueventd: Parsing file /vendor/ueventd.rc... [ 3.871242] ueventd: Parsing file /odm/ueventd.rc... [ 3.876402] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory [ 3.886486] ueventd: Parsing file /ueventd.sequoia.rc... [ 3.891989] ueventd: Unable to read config file '/ueventd.sequoia.rc': open() failed: No such file or directory [ 4.086758] rtk_btusb: get_eversion: status 0, eversion 1 [ 4.090636] ueventd: Coldboot took 0.187 seconds [ 4.110542] rtk_btusb: load_firmware_info: Default lmp_version 0x8761, project_id[14] 0x8761 -> match [ 4.120545] syna-berlin-asoc soc:berlin-asoc: ASoC: CODEC DAI cx2081x-aif not registered init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. ˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. ˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. init syspll 800MHz U-Boot 2016.11 (Oct 14 2020 - 17:46:49 +0800) Model: MARVELL BG5CT STB BOARD DRAM: 2 GiB Flash: SF: Detected MX25L12805 with page size 256 Bytes, erase size 64 KiB, total 16 MiB, mapped at 00000000f0000000 16 MiB MMC: SDHCI: switch host to 1.8V ! sdhci@aa0000: 0 *** Warning - bad CRC, using default environment In: uart@d000 Out: uart@d000 Err: uart@d000 fts: v4 loaded from 0x0000c000 Net: eth0: ethernet@f7b60000 [PRIME], eth1: ethernet@b90000 mvneta_gedll_set: f7ea0a18 = 40 VAS SKIP PHY CONN. Eth auto-negotiation time out. Berlin> Berlin> Berlin> Berlin> Berlin> Berlin> use b2emmc The defualt eMMC partition type on env is DOS partition table is usb:eMMCimg/emmc_part_list, image list is usb:eMMCimg/emmc_image_list starting USB... USB0: Register 2000120 NbrPorts 2 Starting the controller USB XHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found fatload usb 0:1 2000000 eMMCimg/emmc_part_list reading eMMCimg/emmc_part_list 969 bytes read in 38 ms (24.4 KiB/s) get_img: image ready. image_size=000003c9, image_addr=0000000002000000 The eMMC partition type on emmc_part_list is GPT switch to partitions #0, OK switch to partitions #0, OK start to create partiton key_1st 16 1...Done. start to create partiton key_2nd 0 1...Done. start to create partiton fastboot_1st 0 7...Done. start to create partiton fastboot_2nd 0 7...Done. start to create partiton factory_setting 0 16...Done. start to create partiton tzk_recovery 0 16...Done. start to create partiton bl_recovery 0 16...Done. start to create partiton recovery 0 32...Done. start to create partiton tzk_normal 0 16...Done. start to create partiton bl_normal 0 16...Done. start to create partiton boot 0 32...Done. start to create partiton dtbo 0 8...Done. start to create partiton super 0 1656...Done. start to create partiton fastlogo 0 16...Done. start to create partiton vbmeta 0 4...Done. start to create partiton vbmeta_system 0 4...Done. start to create partiton misc 0 2...Done. start to create partiton fts 0 4...Done. start to create partiton frp 0 2...Done. start to create partiton metadata 0 32...Done. start to create partiton cache 0 984...Done. start to create partiton btv_home 0 100...Done. start to create partiton userdata 0 4100...Done. Create partitions OK. fatload usb 0:1 2000000 eMMCimg/emmc_image_list reading eMMCimg/emmc_image_list 471 bytes read in 33 ms (13.7 KiB/s) get_img: image ready. image_size=000001d7, image_addr=0000000002000000 ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/bootloader.subimg to b1 ################################################################### fatload usb 0:1 2000000 eMMCimg/bootloader.subimg reading eMMCimg/bootloader.subimg 166912 bytes read in 39 ms (4.1 MiB/s) get_img: image ready. image_size=00028c00, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: time elapse: 97 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/bootloader.subimg to b2 ################################################################### fatload usb 0:1 2000000 eMMCimg/bootloader.subimg reading eMMCimg/bootloader.subimg 166912 bytes read in 39 ms (4.1 MiB/s) get_img: image ready. image_size=00028c00, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: time elapse: 95 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/key_1st.subimg to sd1 ################################################################### partation[1] name: key_1st partation[1] start addr: 00008000 LBA, 01000000 Bytes partation[1] size: 00000800 LBA, 00100000 Bytes fatload usb 0:1 2000000 eMMCimg/key_1st.subimg reading eMMCimg/key_1st.subimg 49152 bytes read in 38 ms (1.2 MiB/s) get_img: image ready. image_size=0000c000, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: time elapse: 90 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/key_2nd.subimg to sd2 ################################################################### partation[2] name: key_2nd partation[2] start addr: 00008800 LBA, 01100000 Bytes partation[2] size: 00000800 LBA, 00100000 Bytes fatload usb 0:1 2000000 eMMCimg/key_2nd.subimg reading eMMCimg/key_2nd.subimg 49152 bytes read in 38 ms (1.2 MiB/s) get_img: image ready. image_size=0000c000, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: time elapse: 90 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/fastboot_1st.subimg to sd3 ################################################################### partation[3] name: fastboot_1st partation[3] start addr: 00009000 LBA, 01200000 Bytes partation[3] size: 00003800 LBA, 00700000 Bytes fatload usb 0:1 2000000 eMMCimg/fastboot_1st.subimg reading eMMCimg/fastboot_1st.subimg 455744 bytes read in 46 ms (9.4 MiB/s) get_img: image ready. image_size=0006f440, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: round image size to 0006f600. img2sd_impl: time elapse: 162 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/fastboot_2nd.subimg to sd4 ################################################################### partation[4] name: fastboot_2nd partation[4] start addr: 0000c800 LBA, 01900000 Bytes partation[4] size: 00003800 LBA, 00700000 Bytes fatload usb 0:1 2000000 eMMCimg/fastboot_2nd.subimg reading eMMCimg/fastboot_2nd.subimg 455744 bytes read in 58 ms (7.5 MiB/s) get_img: image ready. image_size=0006f440, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: round image size to 0006f600. img2sd_impl: time elapse: 172 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/tzk_recovery.subimg to sd6 ################################################################### partation[6] name: tzk_recovery partation[6] start addr: 00018000 LBA, 03000000 Bytes partation[6] size: 00008000 LBA, 01000000 Bytes fatload usb 0:1 2000000 eMMCimg/tzk_recovery.subimg reading eMMCimg/tzk_recovery.subimg 574656 bytes read in 51 ms (10.7 MiB/s) get_img: image ready. image_size=0008c4c0, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: round image size to 0008c600. img2sd_impl: time elapse: 182 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/bl_recovery.subimg to sd7 ################################################################### partation[7] name: bl_recovery partation[7] start addr: 00020000 LBA, 04000000 Bytes partation[7] size: 00008000 LBA, 01000000 Bytes fatload usb 0:1 2000000 eMMCimg/bl_recovery.subimg reading eMMCimg/bl_recovery.subimg 1215168 bytes read in 59 ms (19.6 MiB/s) get_img: image ready. image_size=00128ac0, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: round image size to 00128c00. img2sd_impl: time elapse: 284 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/recovery.subimg to sd8 ################################################################### partation[8] name: recovery partation[8] start addr: 00028000 LBA, 05000000 Bytes partation[8] size: 00010000 LBA, 02000000 Bytes fatload usb 0:1 2000000 eMMCimg/recovery.subimg reading eMMCimg/recovery.subimg 33554432 bytes read in 390 ms (82.1 MiB/s) get_img: image ready. image_size=02000000, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: time elapse: 5302 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/tzk_normal.subimg to sd9 ################################################################### partation[9] name: tzk_normal partation[9] start addr: 00038000 LBA, 07000000 Bytes partation[9] size: 00008000 LBA, 01000000 Bytes fatload usb 0:1 2000000 eMMCimg/tzk_normal.subimg reading eMMCimg/tzk_normal.subimg 574656 bytes read in 51 ms (10.7 MiB/s) get_img: image ready. image_size=0008c4c0, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: round image size to 0008c600. img2sd_impl: time elapse: 183 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/bl_normal.subimg to sd10 ################################################################### partation[10] name: bl_normal partation[10] start addr: 00040000 LBA, 08000000 Bytes partation[10] size: 00008000 LBA, 01000000 Bytes fatload usb 0:1 2000000 eMMCimg/bl_normal.subimg reading eMMCimg/bl_normal.subimg 1215168 bytes read in 59 ms (19.6 MiB/s) get_img: image ready. image_size=00128ac0, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: round image size to 00128c00. img2sd_impl: time elapse: 284 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/boot.subimg to sd11 ################################################################### partation[11] name: boot partation[11] start addr: 00048000 LBA, 09000000 Bytes partation[11] size: 00010000 LBA, 02000000 Bytes fatload usb 0:1 2000000 eMMCimg/boot.subimg reading eMMCimg/boot.subimg 33554432 bytes read in 391 ms (81.8 MiB/s) get_img: image ready. image_size=02000000, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: time elapse: 5298 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/dtbo.subimg to sd12 ################################################################### partation[12] name: dtbo partation[12] start addr: 00058000 LBA, 0b000000 Bytes partation[12] size: 00004000 LBA, 00800000 Bytes fatload usb 0:1 2000000 eMMCimg/dtbo.subimg reading eMMCimg/dtbo.subimg 8388608 bytes read in 117 ms (68.4 MiB/s) get_img: image ready. image_size=00800000, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: time elapse: 1374 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/super.subimg to sd13 ################################################################### partation[13] name: super partation[13] start addr: 0005c000 LBA, 0b800000 Bytes partation[13] size: 0033c000 LBA, 67800000 Bytes fatload usb 0:1 2000000 eMMCimg/super.subimg reading eMMCimg/super.subimg 1541424848 bytes read in 16176 ms (90.9 MiB/s) get_img: image ready. image_size=5be046d0, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: image is a sparse format. Flashing Sparse Image ........ wrote 1541648384 bytes to 'sd13' img2sd_impl: time elapse: 239955 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/fastlogo.subimg to sd14 ################################################################### partation[14] name: fastlogo partation[14] start addr: 00398000 LBA, 73000000 Bytes partation[14] size: 00008000 LBA, 01000000 Bytes fatload usb 0:1 2000000 eMMCimg/fastlogo.subimg reading eMMCimg/fastlogo.subimg 6605824 bytes read in 114 ms (55.3 MiB/s) get_img: image ready. image_size=0064cc00, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: time elapse: 1116 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/vbmeta.subimg to sd15 ################################################################### partation[15] name: vbmeta partation[15] start addr: 003a0000 LBA, 74000000 Bytes partation[15] size: 00002000 LBA, 00400000 Bytes fatload usb 0:1 2000000 eMMCimg/vbmeta.subimg reading eMMCimg/vbmeta.subimg 8192 bytes read in 33 ms (242.2 KiB/s) get_img: image ready. image_size=00002000, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: time elapse: 78 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/vbmeta_system.subimg to sd16 ################################################################### partation[16] name: vbmeta_system partation[16] start addr: 003a2000 LBA, 74400000 Bytes partation[16] size: 00002000 LBA, 00400000 Bytes fatload usb 0:1 2000000 eMMCimg/vbmeta_system.subimg reading eMMCimg/vbmeta_system.subimg 4096 bytes read in 33 ms (121.1 KiB/s) get_img: image ready. image_size=00001000, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: time elapse: 80 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/erase to sd17 ################################################################### partation[17] name: misc partation[17] start addr: 003a4000 LBA, 74800000 Bytes partation[17] size: 00001000 LBA, 00200000 Bytes img2sd_impl: time elapse: 20 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/erase to sd18 ################################################################### partation[18] name: fts partation[18] start addr: 003a5000 LBA, 74a00000 Bytes partation[18] size: 00002000 LBA, 00400000 Bytes img2sd_impl: time elapse: 16 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/erase to sd19 ################################################################### partation[19] name: frp partation[19] start addr: 003a7000 LBA, 74e00000 Bytes partation[19] size: 00001000 LBA, 00200000 Bytes img2sd_impl: time elapse: 16 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/format to sd20 ################################################################### partation[20] name: metadata partation[20] start addr: 003a8000 LBA, 75000000 Bytes partation[20] size: 00010000 LBA, 02000000 Bytes empty image, do format ext4fs make_ext4fs: dev=000000006feca7a0, start=0x3a8000size=0x10000 Creating filesystem with parameters: Size: 33554432 Block size: 4096 Blocks per group: 32768 Inodes per group: 2048 Inode size: 256 Journal blocks: 1024 Label: Blocks: 8192 Block groups: 1 Reserved block group size: 7 Created filesystem with 11/2048 inodes and 1166/8192 blocks img2sd_impl: time elapse: 419 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/format to sd21 ################################################################### partation[21] name: cache partation[21] start addr: 003b8000 LBA, 77000000 Bytes partation[21] size: 001ec000 LBA, 3d800000 Bytes empty image, do format ext4fs make_ext4fs: dev=000000006feca7a0, start=0x3b8000size=0x1ec000 Creating filesystem with parameters: Size: 1031798784 Block size: 4096 Blocks per group: 32768 Inodes per group: 7872 Inode size: 256 Journal blocks: 3936 Label: Blocks: 251904 Block groups: 8 Reserved block group size: 63 Created filesystem with 11/62976 inodes and 8216/251904 blocks img2sd_impl: time elapse: 1463 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/format to sd22 ################################################################### partation[22] name: btv_home partation[22] start addr: 005a4000 LBA, b4800000 Bytes partation[22] size: 00032000 LBA, 06400000 Bytes empty image, do format ext4fs make_ext4fs: dev=000000006feca7a0, start=0x5a4000size=0x32000 Creating filesystem with parameters: Size: 104857600 Block size: 4096 Blocks per group: 32768 Inodes per group: 6400 Inode size: 256 Journal blocks: 1024 Label: Blocks: 25600 Block groups: 1 Reserved block group size: 7 Created filesystem with 11/6400 inodes and 1438/25600 blocks img2sd_impl: time elapse: 502 ms img2sd_impl: write image data success! ################################################################### CMD_PART: 2 start to write image usb:eMMCimg/userdata.subimg to sd23 ################################################################### partation[23] name: userdata partation[23] start addr: 005d6000 LBA, bac00000 Bytes partation[23] size: 00802000 LBA, 100400000 Bytes fatload usb 0:1 2000000 eMMCimg/userdata.subimg reading eMMCimg/userdata.subimg 291132 bytes read in 55 ms (5 MiB/s) get_img: image ready. image_size=0004713c, image_addr=0000000002000000 verify=yes, will do verification img2sd_impl: image is a sparse format. Flashing Sparse Image ........ wrote 290816 bytes to 'sd23' img2sd_impl: time elapse: 260 ms img2sd_impl: write image data success! img2sd import excute done Burn images OK. Set boot partition 1 to be boot part OK. list2emmc success. time elapse 260698 ms Berlin> Berlin> Berlin> Berlin> Berlin> Berlin> Berlin> Berlin> Berlin> Berlin> Berlin> reboot Unknown command 'reboot' - try 'help' Berlin> rest set resetting ... ˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. bcm_load_next_img error!˙init cpupll 800MHz init mempll 2400MHz init 3GB DDR, lib version r63074 hw_init done custom table done asking BCM to load miniloader. init syspll 800MHz RKtEKsm_:ID r e(blyetase[e0 i:7d] 0) x=d 95c9ca210700,0 c00o0m0m0it05 3tid meU WLeT d (Abyprt e[240 :713]):1 7 :5 5 = 2 04b1994 -90fa706090 c9483d Chip version = 0xa0 Check bootmode = 0x0 ! Image Load done with bootmode=0x0 ! NOTICE: bl31v13692d41f6 starting...5200a7914a95 PMIC: SY8824B selected for board bg5ct_ffv ! set Vcpu from 1050000uv to 1000000uv set Vcore from 1050000uv to 1100000uv i2c status:0x00000550, send_num:0 (expect:0), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_AMP_power, i2c_master_write_and_read fail. sub_cmd_id: 4, param_len: 0x2c, 0x0, 0x4 check keys ret=1 ####register ta LOGO register_ta:tz comm rsp done! 80000000, 0 ####register ta CYPT register_ta:tz comm rsp done! 80000000, 0 [fastlogo] flash_ts_get DisplayPrimaryHDMIBitDepth=2 TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 6 invoke command 0x00000000 TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 6000100 MV_VPPOBJ_EnableAutoPush:12327: Autopush enable : 0 FixColor flag : 1/0, FixColor:1 MV_VPP_FL_Init:891: enableFlushCache=0, iHDMIEnable=0, enableAutoPush=1 [fastlogo] value of frame number=3 [fastlogo] got fit size logo: 1280x720(index:1, num:3) [fastlogo] showlogo_start: logo_start=4148224, logo_size=1843200, logo_width=1280, logo_height=720, logo_stride=2560 MV_VPPOBJ_FL_DisplayFrame:4193: enableInterrupt=0 i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave init_led_devices, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave init_led_devices, i2c_master_write_and_read fail. i2c status:0x00000750, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave init_led_devices, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_LED9_color, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_LED9_color, i2c_master_write_and_read fail. i2c status:0x00000550, send_num:2 (expect:2), recv_num:0 (expect:2) tx abort source:0x1 bit0:(7-bit addressing) address not ACKed by any slave set_LED9_color, i2c_master_write_and_read fail. load boot normal image. BOOT IMAGE HEADER VERSION: 2 ! verify slot done TAMgr_CreateInstance:tz comm rsp done! 80000000, 0, 7 invoke command 0x00000000 TASysCmd_OpenSession:tz comm rsp done! 80000000, 0, 7000200 DRM_SetVersionsV4: Bootpatchlevel: 0x30188 DRM_SetVersionsV4: Vendorpatchlevel: 0x30188 DRM_SetVersionsV4: Systempatchlevel: 0x30188 INFO: set eMMC dll_phsel0 to 0x2a for kernel. size of allocated memory is not correct! can't find the allocated memory [ 0] Start kernel at 0x05880000